10. The "revived rubber" can be kept for half a year, and if the Mooney viscosity increases, mill run the "revived rubber" on the open mill 3 times before using, so that the original state of the "revived rubber" can be restored.

11. Our "revived rubber" needs not to add any vulcanizing agent, accelerator, ageing resister, etc. when it is restored to the final compound rubber. When using the revived rubber, first mill the raw compound rubber on the open mill, and then add the revived rubber and mill together.

12. 30% of "revived rubber"+70% raw compound rubber →production, the basic property of the production remains unchanged.

13. 30% of "revived rubber"+70% raw compound rubber →production, the vulcanizing speed is fast so that the dosage of the additives can be reduced: the dosage of the accelerator and that of the sulfur can be reduced 20% respectively in "70% of raw compound rubber".

14. If it is still necessary to increase the physical property of the "revived rubber" and decrease the Mooney viscosity, our company will provide telephone guidance as the customers requested. Contact us at 0311-85362266.

15. RV rubber reclaiming agent is effective to the vulcanized rubber with high sulfur and low accelerator as well as to that with low sulfur and high accelerator, RV rubber agent has successfully developed the second generation "RMCD rubber mechano-chemical chain scission depolymerizing agent", and we can provide optimal rubber reviving agent according to the different rubber recipe of the customer.

16. Our company can provide corresponding rubber reviving agent for the waste rubber vulcanized by other vulcanizing agent (such as oxide, metal oxide, resin, etc.). Different techniques are corresponding to different rubber reviving agents.

17. Equipment option: refining mill, rubber mechano-chemical reclaiming reactor, the rubber double-screw low temperature reviving extruders (unit), RW rubber high-speed reactor units (high-speed stirring). But the existing open mill of your factory can meet the technical requirements as long as the roll pitch is small enough, it fully qualified for technical requirements.