Applicable Recipe: (the ratio shown on the recipe is weight ratio)

   A. Simple recipe: (suitable for the users to inspect the effect of the reclaiming agent, low-cost application and    revive the scorching rubber)

   B. Recommended recipe: ( Suitable for the rubber products factories to use the waste trimmings from our    factory )

   (*The processing aid can be substituted by 0.5-2 parts by weight of stearic acid, or 3-12 parts by weight of    process oil, or tackifying resin. The softening point of the tackifying resin shall be 80± 20 ℃ , and will not
   become hard while vulcanizing. These requests are to insure the good sheeting effect while milling to make
   the  RV rubber reclaiming agent better mix with rubber powder. Users should decide whether add the    processing aid or not according to the condition of the waste rubber. RW-EPA rubber homogenizing agent    produced by our company can be co-used. 10 parts by weight of the processing aid and raw compound rubber    or 5 parts by weight of plasticated rubber must be added 8-10 min after the reaction of the waste rubber and
   the  RV rubber reclaiming agent.)

  C. Standard recipe: (suitable for applicable recipe in producing RVR revived rubber)

   (*The statement of the processing aid is as the same as the above .)